DISCOVER
AWL's cGMP C-CORE HEATED TRANSFER LINE TECHNOLOGIES 
C-Core Heated Transfer Lines, heated hoses, heated tape

C-CORE ELECTRIC HEATED TRANSFER LINES 

Woven Carbon fibre heating technology usd in C-Core Heated Transfer Lines

C-Carbon core technology is unique, a woven carbon fibre that completely surrounds the process tube for full contact heating without cold spots.

Woven Carbon Fibre Core Patented Technology 

Repeatable accurate results by preventing crystallisation in process tubes by maintaining precise temperatures

of a liquid or gas. Effectively facilitate the flow of viscous materials by heating to an optimal temperature.

You can use up to 3 lines between different pieces of laboratory equipment per controller (temperature dependant).

ie. between a jacketed vessel and a reactor across a pump as illustrated above creating a complete circulatory system.

These C-Core electric heated transfer lines require a controller for operation and have options to be purchased with or without an AWL controller in-case you have an alternative suitable means of control.  

C-CORE ELECTRIC HEATED TRANSFER LINES 30°C TO 200°C up to 10 metres 24V or 240V*

These electric heated transfer lines can be supplied with or without a controller. 

 C-Core Heated Transfer Line (heated hose, heated tape)
Heated Sample  Line CONTROLLER 
 Inside view of a C-Core Heated Transfer Line

AWL use our own patented C-Core woven carbon fibre technology which helps eliminate hot spots

RAPID heat up in just minutes!

 

Safe to the touch. Our transfer lines can deliver high temperatures however their super insulated inner and outer silicon, glass fibre layers and PA mesh outer sleeve  ensure they are safe to work with without specialist clothing

 

Options to have removable cores  

 

NEW! Link Lines available, (typical use across a pump creating a complete circulatory system)

Capable of controlled clean air/gas delivery

These highly flexible lines can be easily manipulated in and around complex spaces and equipment 

SAFE - Low voltage DC 12 volts to 24 volts upto 5 metres (or 240 volts 6 to 10+ metres )

Choice of PTFE, FEP & PFA Fluoropolymer process tubes to 200°c

 

FIXED PROCESS-TUBE TRANSFER LINES
C-Core Heated Transfer LIne with patented carbon core technology (heated hoe, heated tape)

Temperature up to 200°C

Length up to 5 metres (24V) up to 10+ metres 240V 

OD/ID Options metric 6/4mm, 8mm/6mm, 10/8mm,12/10mm

                       imperial  1/4/1/6", 1/4/1/8", 1/2/1/3"

Requires a controller for operation 

FIXED PROCESS-TUBE LINK-LINES

Temperature up to 150°C

Length up to 3 metres 

EHTL%20150%20deg%20rated%20connector%20o
C-Core Heated Transfer Lines, heated hoses, heated tape

above example of set up 

Liquid heted transfer line removable core
C-Core Heated Transfer LIne with patented carbon core technology (heated hoe, heated tape)

OD/ID Options metric 6/4mm, 8mm/6mm, 10/8mm,12/10mm

                       imperial  1/4/1/6", 1/4/1/8", 1/2/1/3"

Link-Lines are used in conjunction with standard lines to link to differing pieces of equipment. These have removable cores to process differing or potent materials and extending also the life of the transfer line 

REMOVABLE PROCESS-TUBE TRANSFER LINES

Removable cores are useful to transfer differing or potent materials and also extend the life of the transfer line 

Temperature up to 200°C

Length up to 5 metres (24V) up to 10+ metres 240V 

REMOVABLE PROCESS-TUBE LINK- LINES
Liquid heted transfer line removable core
C-Core Heated Transfer Lines, heated hoses, heated tape
EHTL%20150%20deg%20rated%20connector%20o

Link-Lines are used in conjunction with standard lines to link to differing pieces of equipment. These have removable cores to process differing or potent materials and extending also the life of the transfer line 

Requires a controller for operation 

Temperature up to 150°C

Length up to 3 metres 

more text

above example of set up 

CONTROLLER OPTIONS FOR C-CORE HEATED TRANSFER LINES

These controllers are used in conjunction with C-Core electric heated transfer lines and offer precise control to deliver fluids at specific defined temperatures. 

 

Capable of controlling up to 3 independent transfer lines at one temperature set point (depending on temperature required)

 

Typical applications include controlling the fluid path temperature across a pump 

Ideal where precision and safety matter in the delivery of hazardous, volatile and sensitive liquids or gases to maintain product integrity.

HTLE  Render image 1.jpg

Easy set up, choose required temperature set point.

LED display will indicate current temperature

STANDARD CONTROLLER
HIGH-POWERED CONTROLLER
CALCULATOR - find out which controller you need >

Repeatable accurate results by preventing crystallisation in a process tube by maintaining precise temperatures of a liquid or gas. 

Liquid heated transfer line
LIQUID HEATED or COOLING TRANSFER LINES

These easy to use jacketed lines are heated and cooled from your own source. Easy to connect to your existing heating or chiller. No tools required 

Cool or maintain a fluid temperature -50 to +90°C

Liquid heted transfer line removable core
Capable of transferring gases and fluids such as water, oils and adhesives

Flexible construction allows to be manipulated into difficult spaces

Suitable for any standard process line

Co-current and counter-current flow

Connects in series or parallel 

Suitable for any standard process line

Tube-in-tube no joints in process pipework 

Choice of PTFE, FEP & PFA fluoropolymer process tubes

Length up to 10+ metres 

CUSTOM LINES
We also make custom transfer lines and look forward to hearing from you to discuss your requirements

Why are temperature controlled transfer lines used?

Temperature controlled transfer lines provide a safe and reliable way of transporting temperature critical liquids or gases from source to destination without temperature loss, ensuring product quality, stability & optimum parameters for spectral analysis or application. They can also prevent crystallisation in process transfer tubes.

Unlike conventional wire wound heating methods, AWL have developed carbon fibre C-Core technology for their Heated Transfer Lines. This results in reliable, uniform heat distribution without hotspots whilst providing the ability to efficiently a desired fluid or gas temperature.  The low voltage and composite electrical and thermal insulation layers make them safe to use across a wide range of industries.  

ELECTRIC
Heated
Transfer
Line
Product Details

Maintains the temperature of a gas or liquid within a transfer line from  ambient  to 200c

Ideal for preventing crystallisation from occurring in a transfer line

Plug and play  - no tools required

Can be used in conjunction with a temperature controller

(HTC 75  HTC 150)

Available in 1m, 2m, 3m

and custom lengths

C-Core Heated Transfer Line
BROCHURE
Controller for Heated Transfer 
Lines
Product Details

Precise control for the Electric Heated Transfer Line to 200°C

Variable setpoints 

INSTRUCTIONS
Agricultural
Aerospace
Environmental
Industrial
1306 Liquid Heated Transfer Line Brochur
Fluid 
Heated
 Transfer 
Line
Product Details

Maintains the temperature of a gas or liquid within a transfer line from  ambient  to 90°c (water)

via a heating or cooling source

Connects in series or parallel 

Ideal for preventing crystallisation from occurring in a transfer line

Plug and play no tools required

Available in 1m, 2m, 3m 

and custom lengths

Liquid Heaed Transfer Line
BROCHURE
Automotive 
KEY FEATURES
C-Core Heated Transfer Lines run through a re-circ pump

Series connection across a pump 

C-Core Heated Transfer Line and Link Line example of typical use between a jacketed vessel and a reactor

General point A to B

C-Core Heated Transfer Line Series Connection with a Vessel Jacket inlet or outlet

Series connection with a vessel jacket inlet or outlet 

EXAMPLES OF SET UP